Updated HS2 designs bring environmental and community benefits

HS2 Streethay cutting under the A38

Updated designs for the HS2 high speed rail project at Streethay, near Lichfield, will now bring environmental and community benefits. 

HS2’s designers have reduced the length of wall structures for the railway at Streethay from 1.6km to 420 metres, meaning 80% less concrete will be needed, supporting HS2’s ambition to cut carbon on the project.

This will save around 70,000 cubic metres of concrete, the equivalent to 6,700 concrete mixer lorry loads. 

In total, around 420,000 tonnes of carbon have been saved in this area of the project.

The railway will pass through Streethay in a cutting, and the shortening of the retaining structures also means the community will experience less noise and disruption during construction because fewer large machines will be needed on site.

Most of the Streethay cutting will now have sloping earth banks, improving the visual appearance of the railway and increasing the opportunity for wildlife habitats and landscape planting to protect against noise from the railway. 

The updated design also results in a shorter diversion of Fulfen Wood watercourse.

The early proposed design was for the railway to cross over the A38 Rykneld Street, A38 southbound slip road and the South Staffordshire train line. 

As a result of community feedback received during the public consultation, the design was changed in 2017, with HS2 now passing beneath these roads and the railway in a cutting, which greatly reduces the visual impact of HS2 in this area.

Simon Hinsley, senior project manager for HS2 Ltd, said: “As we’ve been developing the detailed design for HS2, it’s vital that we try to minimise impacts and get the best solution for the communities near the new railway line. 

“We listened to the community back in 2017 and changed the design from viaduct to cutting, and we’re pleased that these further updates bring more benefits, both for the local community and the environment – better visuals, less carbon from concrete, shorter construction period and more environmental features.”

Andy deBell, head of stakeholder engagement for HS2’s civils contractor BBV, said: “We’re pleased to confirm these new and improved design changes, which we’ve introduced after working closely with the local community.

“This new design will see the HS2 line pass underneath the A38 and neighbouring railway line, bringing significant environmental and community benefits. We’ll need to work on the slip road to the south to deliver these changes, which we understand will cause some localised disruption. However, we’ll do everything we can to minimise any impact as much as possible. Phased traffic management and signposted diversions will be in place during this phase of the work.

“We’ll continue to make sure the local community is kept updated, providing more detail on the works before they begin and during construction. There’ll also be opportunities in the near future for local residents and businesses to attend community drop-in sessions, where they can find out more about what’s going on in their area.”

If you would like to contact Karen McLauchlan about this, or any other story, please email